AP2192AFGEG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2192A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2192AFGEG-7 Overview
It is packaged in the form of a Cut Tape (CT).This file is included in package 8-UDFN Exposed Pad.Surface Mount is the mounting type of the LED driver.There is a USB Switch switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 2 outputs.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is P-Channel volts.Features of the lighting driver are Load Discharge, Status Flag.The AP2192A family consists of this type.A total of 8 terminations have been recorded.The operation is carried out using the 8 pins.The LED driving board has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.A supply voltage of 5V leads to high efficiency.It is positioned in the direction of Surface Mount.A total of 8 pins are present on it.Lighting drivers with 125mOhm resistance are used.The maximum supply voltage for this LED driver is 5.5V (Vsup).In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 available channels.
AP2192AFGEG-7 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2192AFGEG-7 Applications
There are a lot of Diodes Incorporated AP2192AFGEG-7 Power Switches ICs applications.
- Wireless/Networking Cards
- Gaming
- Hard Disk Drives
- Solid-State Drives
- Wireless Modem Data Cards
- Handheld Devices
- USB Protection
- Notebook PC
- PC Cards
- USB3.1 Power Delivery
