banner_page

AP2192AMPG-13

P-Channel 0.65mm PMIC AP2192A 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2192AMPG-13
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 754
  • Description: P-Channel 0.65mm PMIC AP2192A 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Terminal Finish Matte Tin (Sn)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AP2192A
Pin Count 8
Number of Outputs 2
Output Type P-Channel
Max Output Current 1.5A
Supply Voltage-Max (Vsup) 5.5V
Number of Channels 2
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 85m Ω
Height Seated (Max) 1.1mm
Length 3mm
Width 3mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Published 2010
JESD-609 Code e3
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 125mOhm

AP2192AMPG-13 Overview


As a result, it is packaged in the form of a Cut Tape (CT).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package that includes it.The lighting driver has the mounting type Surface Mount.It owns the USB Switch switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 2 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is P-Channel volts at maximum.Load Discharge, Status Flag features are available on the lighting driver.It is a member of the AP2192A family.There are 8 terminations in it.For operation, we use the 8 pins.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 8 pins are present on it.125mOhm resistance is present in the lighting driver.The Vsup value (maximum supply voltage) is set to 5.5V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.

AP2192AMPG-13 Features


Supplied from 5V
Resistance of 125mOhm
2 channels

AP2192AMPG-13 Applications


There are a lot of Diodes Incorporated AP2192AMPG-13 Power Switches ICs applications.

  • Hot-Swap Systems
  • USB3.1 Power Delivery
  • Various applications equipped with buttons
  • Telecom and Network Systems
  • USB Power Distribution
  • Low Voltage I/O System Power
  • PC Card Hot Swap
  • Smartphone and PDA
  • Wireless Modem Data Cards
  • Wireless/Networking Cards

Write a review

Note: HTML is not translated!
    Bad           Good