AP2192SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2192 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 120m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AP2192SG-13 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.USB Switch is the type of switch owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.I believe it belongs to the AP2192 family.In total, there are 8 terminations.The operation is carried out using the 8 pins.Currently, the lighting driver has a total of 2 functions.The maximum output current must drop to 1.5A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driver has a total of 8 pins.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).This part's power supply is 3/5V.
AP2192SG-13 Features
Supplied from 5V
AP2192SG-13 Applications
There are a lot of Diodes Incorporated AP2192SG-13 Power Switches ICs applications.
- USB Power Distribution
- HDD and SSD
- USB Protection
- Smart Phones, Feature Phones
- Gaming
- Portable GPS Device
- Low Voltage I/O System Power
- Handheld Devices
- PDAs
- Solid State Drivers
