AP2281-1FMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 210mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.41W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2281 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1.41W |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~6V |
| Telecom IC Type | TELECOM CIRCUIT |
| Rds On (Typ) | 80m Ω |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2281-1FMG-7 Overview
Tape & Reel (TR) is the way it's packaged.In the 6-UFDFN Exposed Pad package, it is included.The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.I believe it belongs to the AP2281 family.It contains 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.It consists of 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 6 pins.The LED driver has 210mOhm resistance.This case results in a 0A output current.
AP2281-1FMG-7 Features
Supplied from 5V
Resistance of 210mOhm
AP2281-1FMG-7 Applications
There are a lot of Diodes Incorporated AP2281-1FMG-7 Power Switches ICs applications.
- Portable/Handheld Devices
- Portable Devices
- Gaming
- Hot Swaps
- Set-top-box
- Various applications equipped with buttons
- Hot-Swap Systems
- Smartphone and PDA
- Portable Music Players
- Wearable Devices
