AP2281-3WG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| Resistance | 210mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 720mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2281 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Voltage | 6V |
| Interface | On/Off |
| Current | 2A |
| Output Configuration | High Side |
| Power Dissipation | 720mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~6V |
| Telecom IC Type | TELECOM CIRCUIT |
| Rds On (Typ) | 80m Ω |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2281-3WG-7 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a SOT-23-6 package that includes it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.There is a AP2281 family of things that it belongs to.There are 6 terminations in it.The operation is carried out using the 6 pins.It has 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 6 pins.Lighting drivers with 210mOhm resistance are used.It is set to 0A in this case.
AP2281-3WG-7 Features
Supplied from 5V
Resistance of 210mOhm
AP2281-3WG-7 Applications
There are a lot of Diodes Incorporated AP2281-3WG-7 Power Switches ICs applications.
- Notebook PC
- Set-Top Boxes
- Portable Video Game Players
- Hot Swap
- Storage Drives
- USB Power Distribution
- Wireless/Networking Cards
- USB Ports/Hubs
- PDAs
- Hot Swap
