AP22815BWT-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | Matte Tin (Sn) |
| Number of Outputs | 1 |
| Output Type | N/P-Channel |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0V~23V |
| Fault Protection | Over Current, Over Temperature, Over Voltage, Short Circuit |
| Rds On (Typ) | 40m Ω |
| RoHS Status | ROHS3 Compliant |
AP22815BWT-7 Overview
It is package in Tape & Reel (TR) case.Package SOT-23-5 Thin, TSOT-23-5 contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of USB Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of 3V~5.5V.A maximum output voltage of N/P-Channel volts can be achieved by this LED driver.There are Load Discharge, Status Flag features available on the LED driving board.3AV is the maximum output of the LED driver.
AP22815BWT-7 Features
AP22815BWT-7 Applications
There are a lot of Diodes Incorporated AP22815BWT-7 Power Switches ICs applications.
- Solid-State Drives
- Low Voltage I/O System Power
- Hot-Swap Systems
- Hot Swap
- Telecom and Network Systems
- HDD and SSD
- Wearable Devices
- USB Ports/Hubs
- Wireless Headsets
- Hot Swap
