AP22966DC8-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.7W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| JESD-30 Code | R-PDSO-N14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Rds On (Typ) | 17m Ω |
| Built-in Protections | TRANSIENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.83mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP22966DC8-7 Overview
It is packaged in the form of a Tape & Reel (TR).In the 14-WFDFN Exposed Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver is equipped with 2 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts has been specified.It is equipped with Load Discharge, Slew Rate Controlled features.As a result, there are 14 terminations.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 6A.High efficiency is possible when the supply voltage is set to 5V.Lighting drivers with 25mOhm resistance are used.The maximum supply voltage for this LED driver is 5.5V (Vsup).
AP22966DC8-7 Features
Supplied from 5V
Resistance of 25mOhm
AP22966DC8-7 Applications
There are a lot of Diodes Incorporated AP22966DC8-7 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Hot Swap
- Low Voltage I/O System Power
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Portable GPS Device
- USB Protection
- Portable GPS
- USB3.1 Power Delivery
