AP2311MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 2.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2311 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2311MPG-13 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.Mounting type Surface Mount is selected for the LED driving board.USB Switch is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.This object belongs to the AP2311 family.It contains 8 terminations.There are 1 functions of the LED driver.The maximum output current must drop to 2A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.135mOhm is the resistance of the lighting driver.It is set to 2A in this case.Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.
AP2311MPG-13 Features
Supplied from 5V
Resistance of 135mOhm
1 channels
AP2311MPG-13 Applications
There are a lot of Diodes Incorporated AP2311MPG-13 Power Switches ICs applications.
- Notebook PC
- Set-top-box
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Hot Swaps
- USB3.1 Power Delivery
- Storage Drives
- Hot Swap
- Portable/Handheld Devices
- PDAs
