AP2331FJ-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 3-UDFN Exposed Pad |
| Supplier Device Package | U-DFN-2020-3 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 350mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Function | Current Switch |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.2V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | 2.7V~5.2V |
| Current - Output | 200mA |
| Turn On Delay Time | 700 μs |
| Sensing Method | High-Side |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AP2331FJ-7 Overview
Including buck boost converter in package Cut Tape (CT) is a good idea.In the same manner as 3-UDFN Exposed Pad, voltage regulator is packaged.The current regulator is mounted by Surface Mount.Temperatures should not exceed -40°C~85°C during operation.There is a support for voltages of 2.7V~5.2V as input voltages for this voltage regulator.This electronic part is mounted in the way of Surface Mount.As a result of 200mA's output current, it offers maximum design flexibility.A maximum supply voltage of 5.2V can be supported by it.The buck boost converter operates with a minimum supply voltage of 2.7V.To ensure its reliability, the boost controller operates at its maximum operating temperature, 85°C.During operation, it is recommended to use a temperature greater than -40°C.The output is configured as 1.The resistance of this electrical dc to dc converter is 350mOhm (Ω).
AP2331FJ-7 Features
Cut Tape (CT) package
The maximal supply voltage of 5.2V
The maximal operating temperature of 85°C to ensure its reliability.
1 output
AP2331FJ-7 Applications
There are a lot of Diodes Incorporated AP2331FJ-7 Current Regulation/Managements applications.
- Automotive current measurement
- Programmable current source
- Smart battery packs
- Battery chargers
- Battery management
- Over current monitor
- DC-to-dc converters
- Over-current measurement
- DC motor control
- Diesel injection controls
