AP2331SA-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 8.788352mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2331 |
| Function | Current Switch |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.2V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 2.7V~5.2V |
| Current - Output | 200mA |
| Adjustable Threshold | NO |
| Turn On Delay Time | 700 μs |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.2V |
| Sensing Method | High-Side |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2331SA-7 Overview
Buck boost converter is included in the package Tape & Reel (TR).Depending on how TO-236-3, SC-59, SOT-23-3 packages voltage regulator, voltage regulator will be packaged in the same way.A mounting hole is provided for Surface Mount to mount this current regulator.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~85°C.The input voltage of 2.7V~5.2V is supported as an input voltage.As well as 3 terminations, there are also 3 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.In the AP2331 family, current regulator is a member.As part of a signal interface in a computer or other communication constant current regulator, 3 pins are pronged contacts.The current regulator is mounted on the Surface Mount axis.Providing that it is powered by a 5VV power supply, the constant current should work without any problems.As a result of 200mA's output current, it offers maximum design flexibility.The analog IC used by this power converter is called POWER SUPPLY SUPPORT CIRCUIT.Channels are becoming stronger/weaker based on the following statistics: 1.As a result, it allows 5.2V to be supplied with its maximum voltage.As long as the supply voltage is lower than 2.7V, it will operate correctly.As a result of its maximum input voltage, 5.2V has maximum design power converter flexibility.A minimum input voltage makes 2.7V a flexible design option.1 output is configured.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this electrical dc to dc converter is 350mOhm (Ω).
AP2331SA-7 Features
Tape & Reel (TR) package
AP2331 family
The maximal supply voltage of 5.2V
1 output
AP2331SA-7 Applications
There are a lot of Diodes Incorporated AP2331SA-7 Current Regulation/Managements applications.
- Battery chargers
- Programmable current source
- Over-current protection
- Industrial applications current measurement
- Engine management
- DC-to-dc converters
- Level translating
- Vehicle dynamic controls
- Suspension controls
- DC motor control
