AP2331W-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 59 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2331 |
| JESD-30 Code | R-PDSO-G3 |
| Function | Current Switch |
| Number of Outputs | 1 |
| Max Output Current | 200mA |
| Number of Channels | 1 |
| Voltage | 5.2V |
| Interface | On/Off |
| Max Supply Voltage | 5.2V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 2.7V~5.2V |
| Current | 200mA |
| Output Configuration | High Side |
| Adjustable Threshold | NO |
| Turn On Delay Time | 700 μs |
| Fault Protection | Over Temperature, Reverse Current |
| Sensing Method | High-Side |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2331W-7 Overview
Package Tape & Reel (TR) includes buck boost converter.oltage regulator is packaged in such a way that TO-236-3, SC-59, SOT-23-3 would understand.Current regulator is mounted by Surface Mount.Temperatures should not exceed -40°C~85°C during operation.Voltages of 2.7V~5.2V can be input as input voltages in this module.In addition to the 3 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.There are two types of AP2331s in this family.59-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.This current regulator is mounted by Surface Mount.In order to make this constant current work, it needs to be powered by 5VV.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.A significant number of channels are growing strongly/weakly: 1.As a result, it allows 5.2V to be supplied with its maximum voltage.It operates with the minimal supply voltage of 2.7V.200mA's maximal output current results in maximum voltage regulator's design flexibility.There is a 1 output configured.The resistance of the electrical dc to dc converter is 350mOhm (Ω).
AP2331W-7 Features
Tape & Reel (TR) package
AP2331 family
The maximal supply voltage of 5.2V
1 output
AP2331W-7 Applications
There are a lot of Diodes Incorporated AP2331W-7 Current Regulation/Managements applications.
- Automotive current measurement
- Current sensing
- Vehicle dynamic controls
- Over current monitor
- Smart battery packs
- Level translating
- Engine management
- Industrial applications current measurement
- Suspension controls
- Battery chargers
