AP2401MP-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2401 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2401MP-13 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The mounting type of the LED driver is Surface Mount.The switch type of this switch is USB Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of P-Channel volts at its maximum output.There are Load Discharge, Status Flag features available on the LED driving board.The AP2401 family consists of this type.There are 8 terminations in it.It is necessary to use the 8 pins in order to operate the LED driver.It contains 1 functions.This operation requires the maximum output current to be decreased to 2A.Using a voltage of 5V allows for high efficiency.It is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.In this LED driving board, there is 84mOhm resistance.It is set to 2A in this case.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.
AP2401MP-13 Features
Supplied from 5V
Resistance of 84mOhm
1 channels
AP2401MP-13 Applications
There are a lot of Diodes Incorporated AP2401MP-13 Power Switches ICs applications.
- Wearable Devices
- Portable GPS Device
- Telecom and Network Systems
- Gaming
- Set-Top Boxes
- USB Power Distribution
- HDD, SSD
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Hot-Swap Systems
