AP2401S-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2401 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2401S-13 Overview
A Tape & Reel (TR) is used to package it.Package 8-SOIC (0.154, 3.90mm Width) contains it.It has been mounted as Surface Mount on the LED driver.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is P-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.I believe it belongs to the AP2401 family.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 2A.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this lighting driver.There are 8 pins in total on this board.In this case, there is 84mOhm resistance in the LED driving board.When this is the case, the output current is set to 2A.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.It has a maximum input voltage of 5.5V volts.The input voltage minimum is 2.7V volts.
AP2401S-13 Features
Supplied from 5V
Resistance of 84mOhm
1 channels
AP2401S-13 Applications
There are a lot of Diodes Incorporated AP2401S-13 Power Switches ICs applications.
- Portable Devices
- USB3.1 Power Delivery
- Notebook PC
- Various applications equipped with buttons
- Set-top-box
- Gaming
- Portable GPS Device
- Low Voltage I/O System Power
- Solid State Drivers
- Solid-State Drives
