AP2401SN-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1998 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2401SN-7 Overview
A Cut Tape (CT) is used to package it.There is a 6-UDFN Exposed Pad package that includes it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.It has a total of Load Discharge, Status Flag features.A total of 6 terminations have been recorded.In order to operate, the 6 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 2A.Using a voltage of 5V allows for high efficiency.It is mounted in the way of Surface Mount.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).Normal operation requires Vsup above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
AP2401SN-7 Features
Supplied from 5V
1 channels
AP2401SN-7 Applications
There are a lot of Diodes Incorporated AP2401SN-7 Power Switches ICs applications.
- Storage Drives
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Telecom and Network Systems
- Set-Top Boxes
- Hard Disk Drives
- Portable Video Game Players
- Hot Swap
- USB3.1 Power Delivery
- PC Cards
