AP2411FGE-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 0.6mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2411FGE-7 Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 8-UDFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.USB Switch is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Load Discharge, Status Flag features.A total of 8 terminations can be found in it.The 8 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 2A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.It is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.84mOhm resistance is present in the lighting driver.It is set to 2A in this case.The maximum supply voltage is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.
AP2411FGE-7 Features
Supplied from 5V
Resistance of 84mOhm
1 channels
AP2411FGE-7 Applications
There are a lot of Diodes Incorporated AP2411FGE-7 Power Switches ICs applications.
- Wearable Devices
- Hot Swap
- USB Ports/Hubs
- Handheld Devices
- PC Cards
- Wireless Headsets
- HDD and SSD
- HDD, SSD
- USB3.1 Power Delivery
- Storage Drives
