AP2411MP-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2411 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2411MP-13 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.USB Switch is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.It has a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.It is a member of the AP2411 family.It has a total of 8 terminations.For operation, we use the 8 pins.The LED driver has 1 functions.The maximum output current must drop to 2A to meet the operation criteria.A supply voltage of 5V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.It is equipped with a total of 8 pins.Lighting drivers with 84mOhm resistance are used.When this is the case, the output current is set to 2A.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.This LED driving board can accept voltages up to 5.5V volts as an input.As far as input voltage goes, it has a minimum of 2.7V volts.
AP2411MP-13 Features
Supplied from 5V
Resistance of 84mOhm
1 channels
AP2411MP-13 Applications
There are a lot of Diodes Incorporated AP2411MP-13 Power Switches ICs applications.
- Gaming
- Smart Phones, Feature Phones
- HDD and SSD
- Set-top-box
- Wireless/Networking Cards
- Handheld Devices
- USB3.1 Power Delivery
- Various applications equipped with buttons
- USB Power Distribution
- Notebook PC
