AP2411S-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2411 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2411S-13 Overview
A Tape & Reel (TR) is used to package it.This file is included in package 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.This switch is of type USB Switch.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It has a total of Load Discharge, Status Flag features.It is a member of the AP2411 family.The termination count is 8.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.Currently, the LED driving board has 84mOhm resistance.When this is the case, the output current is set to 2A.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.To choose from, there are 1 channels.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 2.7V volts.
AP2411S-13 Features
Supplied from 5V
Resistance of 84mOhm
1 channels
AP2411S-13 Applications
There are a lot of Diodes Incorporated AP2411S-13 Power Switches ICs applications.
- HDD and SSD
- HDD, SSD
- Hot Swap
- Wearable Devices
- Portable GPS
- Wireless Headsets
- Portable Music Players
- Notebook and Tablet Computers
- Solid State Drivers
- Wireless Modem Data Cards
