AP2552AFDC-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 80m Ω |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2552AFDC-7 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package 6-UDFN Exposed Pad.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.There are Load Discharge, Status Flag features available on the LED driving board.As a result, there are 6 terminations.6 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 2.1A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way.The LED driver has 80mOhm resistance.The maximum supply voltage for this LED driver is 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this lighting driver, SPST is the analog IC.There are a total of 1 channels available.
AP2552AFDC-7 Features
Supplied from 5V
Resistance of 80mOhm
1 channels
AP2552AFDC-7 Applications
There are a lot of Diodes Incorporated AP2552AFDC-7 Power Switches ICs applications.
- Various applications equipped with buttons
- Set-top-box
- USB Power Distribution
- PDAs
- Portable Devices
- Wearable Devices
- USB Ports/Hubs
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Gaming
