AP2552AW6-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2552 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 2.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 70m Ω |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2552AW6-7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in SOT-23-6.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of P-Channel volts.There are Load Discharge, Status Flag features available on the LED driving board.As you can see, it comes from the AP2552 family.There are 6 terminations in it.The 6 pins are used to operate the LED driver.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2.1A.A supply voltage of 5V leads to high efficiency.Surface Mount is mounted in the way.80mOhm resistance is present in the lighting driver.The output current is set to 2.1A in this case.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.This LED driving board uses an analog IC SPST.In total, 1 channels are available.
AP2552AW6-7 Features
Supplied from 5V
Resistance of 80mOhm
1 channels
AP2552AW6-7 Applications
There are a lot of Diodes Incorporated AP2552AW6-7 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable Video Game Players
- HDD and SSD
- PC Cards
- Smart Phones, Feature Phones
- Solid State Drivers
- USB Ports/Hubs
- Smartphone and PDA
- Hot Swap
- Mobile Communication Devices
