AP2552W6-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2552 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 70m Ω |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2552W6-7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the SOT-23-6 package, it is included.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Load Discharge, Status Flag features in order for it to be useful.It comes under the family of AP2552.In total, there are 6 terminations.The operation is performed through the 6 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 2.1A.High efficiency is possible at 5V supply voltage.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has 80mOhm resistance.The maximum supply voltage is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.There is an analog input IC in this gadget, which is SPST.There are a total of 1 channels to choose from.
AP2552W6-7 Features
Supplied from 5V
Resistance of 80mOhm
1 channels
AP2552W6-7 Applications
There are a lot of Diodes Incorporated AP2552W6-7 Power Switches ICs applications.
- Portable GPS
- USB Ports/Hubs
- USB Protection
- Hot Swaps
- Storage Drives
- Solid State Drivers
- Set-Top Boxes
- Hot Swap
- Hot Swap
- PC Card Hot Swap
