AP2553AFDC-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2553 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 80m Ω |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2553AFDC-7 Overview
It is package in Tape & Reel (TR) case.The 6-UDFN Exposed Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.A lighting driver with Load Discharge, Status Flag features is available.It is a member of the AP2553 family.There are 6 terminations in it.In order to operate, 6 pins are used.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 2.1A.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has 70mOhm resistance.A maximum supply voltage of 5.5V is set in Vsup.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.This LED driving board uses an analog IC SPST.In total, 1 channels are available.
AP2553AFDC-7 Features
Supplied from 5V
Resistance of 70mOhm
1 channels
AP2553AFDC-7 Applications
There are a lot of Diodes Incorporated AP2553AFDC-7 Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- Telecom and Network Systems
- Wearable Devices
- Set-Top Boxes
- Smartphone and PDA
- PC Card Hot Swap
- Mobile Communication Devices
- HDD and SSD
- Hot Swaps
