AP2553AW6-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 70mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2553 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 70m Ω |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2553AW6-7 Overview
A Tape & Reel (TR) is used to package it.It's included in the SOT-23-6 package.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.Features of the lighting driver are Load Discharge, Status Flag.There is a AP2553 family of things that it belongs to.A total of 6 terminations can be found in it.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 2.1A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.The LED driver has 70mOhm resistance.In this case, Vsup (maximum supply voltage) is set to 5.5V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.In this LED driving board, the analog IC SPST is employed.We offer 1 channels in total.
AP2553AW6-7 Features
Supplied from 5V
Resistance of 70mOhm
1 channels
AP2553AW6-7 Applications
There are a lot of Diodes Incorporated AP2553AW6-7 Power Switches ICs applications.
- HDD and SSD
- Mobile Communication Devices
- USB Ports/Hubs
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Hot-Swap Systems
- Portable GPS Device
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Hard Disk Drives
