AP2553FDC-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 833mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2553 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 80m Ω |
| Height | 580μm |
| Length | 2.08mm |
| Width | 2.075mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2553FDC-7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 6-UDFN Exposed Pad package includes it.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.There is a maximum output voltage of P-Channel volts.A lighting driver with Load Discharge, Status Flag features is available.It belongs to the AP2553 family.A total of 6 terminations can be found in it.In order to operate, the 6 pins are used.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 2.1A.The supply voltage can be 5V for high efficiency.In this case, it is mounted in the way of Surface Mount.70mOhm resistance is present in the lighting driver.There is an analog input IC in this gadget, which is SPST.We currently have 1 channels available.As far as input voltage goes, its maximum is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.
AP2553FDC-7 Features
Supplied from 5V
Resistance of 70mOhm
1 channels
AP2553FDC-7 Applications
There are a lot of Diodes Incorporated AP2553FDC-7 Power Switches ICs applications.
- Low Voltage I/O System Power
- Hard Disk Drives
- Wireless Headsets
- Portable GPS Device
- PC Card Hot Swap
- Hot Swap
- Wireless Modem Data Cards
- HDD and SSD
- Gaming
- PC Cards
