banner_page

AP2553W6-7

P-Channel 0.95mm PMIC AP2553 6 Pin 5V SOT-23-6


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2553W6-7
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 832
  • Description: P-Channel 0.95mm PMIC AP2553 6 Pin 5V SOT-23-6 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~125°C TJ
Packaging Digi-Reel®
Published 2014
JESD-609 Code e3
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Resistance 70mOhm
Terminal Finish Matte Tin (Sn)
Power Rating 340mW
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.95mm
Base Part Number AP2553
Number of Outputs 1
Output Type P-Channel
Max Output Current 2.1A
Number of Channels 1
Voltage 5.5V
Interface On/Off
Analog IC - Other Type SPST
Current 2.1A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 1.5 ms
Switch Type General Purpose
Turn-Off Delay Time 500 μs
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO
Switch-on Time-Max 3000000ns
Rds On (Typ) 70m Ω
Height 1.3mm
Length 3.1mm
Width 1.7mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

AP2553W6-7 Overview


It is packaged in the form of a Digi-Reel?.It is included with the SOT-23-6 package as well.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Load Discharge, Status Flag features in order for it to be useful.This object belongs to the AP2553 family.As a result, there are 6 terminations.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 2.1A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.It has a resistance of 70mOhm.In this LED driving board, the analog IC SPST is employed.There are a total of 1 available channels.

AP2553W6-7 Features


Supplied from 5V
Resistance of 70mOhm
1 channels

AP2553W6-7 Applications


There are a lot of Diodes Incorporated AP2553W6-7 Power Switches ICs applications.

  • Portable/Handheld Devices
  • PC Card Hot Swap
  • Wireless Modem Data Cards
  • Portable Devices
  • Various applications equipped with buttons
  • Notebook and Tablet Computers
  • PDAs
  • Portable GPS
  • Storage Drives
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good