AP2815CMM-G1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 60mOhm |
| RoHS Status | ROHS3 Compliant |
AP2815CMM-G1 Overview
A Tube is used to package it.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.The switch type of this switch is USB Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.There is a maximum output of 1.5AV from the LED driver.
AP2815CMM-G1 Features
AP2815CMM-G1 Applications
There are a lot of Diodes Incorporated AP2815CMM-G1 Power Switches ICs applications.
- PC Cards
- Portable GPS
- Wireless Headsets
- Wearable Devices
- Low Voltage I/O System Power
- HDD and SSD
- Set-Top Boxes
- Wireless/Networking Cards
- Various applications equipped with buttons
- USB Power Distribution
