banner_page

AP2820GMMTR-G1

N-Channel PMIC 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2820GMMTR-G1
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 361
  • Description: N-Channel PMIC 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Supplier Device Package 8-MSOP
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2012
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 80mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Number of Outputs 1
Output Type N-Channel
Max Output Current 2.5A
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Current - Output (Max) 2.5A
Output Configuration High Side
Output Current 2.5A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 60mOhm
Radiation Hardening No
RoHS Status ROHS3 Compliant

AP2820GMMTR-G1 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.It owns USB Switch switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.8 pins are used for operation.In terms of output, the lighting driver can provide a maximum of 2.5A V.The maximum output current drops to 2.5A in order to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has 80mOhm resistance.When this case is used, the output current is set to 2.5A.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.It can handle a maximum voltage of 5.5VV.It can work with as low a supply voltage as feasible, such as 2.7VV.

AP2820GMMTR-G1 Features


Resistance of 80mOhm

AP2820GMMTR-G1 Applications


There are a lot of Diodes Incorporated AP2820GMMTR-G1 Power Switches ICs applications.

  • Telecom and Network Systems
  • USB Ports/Hubs
  • Handheld Devices
  • HDD, SSD
  • HDD and SSD
  • Storage (HDDs, SSDs)
  • Portable GPS
  • Portable/Handheld Devices
  • USB Power Distribution
  • Hot Swaps

Write a review

Note: HTML is not translated!
    Bad           Good