AP3019AKTR-G1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1.2MHz |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 2.5mA |
| Output Current | 40mA |
| Max Supply Current | 3.2mA |
| Max Output Voltage | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 16V |
| Output Current per Channel | 550mA |
| Current - Output / Channel | 550mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 16V |
| Voltage - Supply (Min) | 2.5V |
| Height | 1.4mm |
| RoHS Status | ROHS3 Compliant |
AP3019AKTR-G1 Overview
The SOT-23-6 package saves space on the board. LED drivers with this design have 1 outputs.Surface Mount is used to mount the led driver.In this case, the DC DC Regulator emerges as highly efficient and reliable.LED drivers capable of operating at -40°C~85°C TA can be used.There are considerable benefits for Backlight.A frequency of 1.2MHz is used as the basis for operation.To form its configuration, 6 pins are used.Having a voltage supply below 2.5V can lead to undetermined failures.There is a mounting of it by Surface Mount.It is acceptable to operate with a supply voltage of 16V.It is designed to support a maximum value of 16V.As its minimal input voltage, it operates at 2.5V.It achieves maximum efficiency with a minimal voltage supply of 2.5V.Currently, the supply current can only reach 16V.As long as the maximum supply current is under 3.2mA, it can deliver high efficiency.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.In this case, the load can only be supplied with 40mA current.Operating temperatures should be above -40°C to ensure stable operation.This electronic component may perform its functions fully if the switching frequency is maintained at 1.2MHz.There is 30V output voltage on this device.Voltages above 38V should not be allowed.A total of 1 channels are currently available for transmission.
AP3019AKTR-G1 Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.2MHz
Output voltage of 30V
AP3019AKTR-G1 Applications
There are a lot of Diodes Incorporated AP3019AKTR-G1 LED Driver ICs applications.
- Medical surgery lighting
- A- lamps
- Street lighting
- Refrigeration lighting
- LED headlights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- Museum lighting
- General lighting
- White LED Backlight for portable equipment
