AP3031KTR-G1
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1MHz |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 260mA |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Output Current | 1.4A |
| Max Supply Current | 5mA |
| Max Output Voltage | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 16V |
| Output Current per Channel | 1.4A |
| Current - Output / Channel | 1.4A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 16V |
| Voltage - Supply (Min) | 2.7V |
| Height | 1.3mm |
| Length | 3.02mm |
| Width | 1.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Weight | 14.996898mg |
AP3031KTR-G1 Overview
SOT-23-6 saves board space. For the design of these LED drivers, 1 outputs are used.Surface Mount is used to mount the led driver.It emerges as a DC DC Regulator with high efficiency.LED drivers capable of operating at -40°C~85°C TA can be used.Backlight benefits significantly from the program.The frequency of 1MHz is used as the basis for its operation.With a base of 6, this LED light driver is configured.It is likely that undetermined failures will occur if the voltage supply is less than 2.7V.Surface Mount has been mounted with the device.It is acceptable to supply voltages of 16V.Supply voltage can be set to a maximum value of 16V.A minimal input voltage of 2.7V is required for it to operate.16V is the maximum value of the supply current.Whenever the supply current is lower than 5mA, it can provide high efficiency.The operating temperature should not exceed 85°C to ensure stable operation.1.4A is the maximum amount of current that can be supplied to the load.It is essential to maintain a temperature greater than -40°C in order to achieve stable operation.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.At maximum output current 260mA, it will deliver all the benefits of a LED driver.Ideally, the output voltage should not exceed 38V.A total of 1 channels are available for transmission.The output type is Adjustable.
AP3031KTR-G1 Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Switching frequency of 1MHz
AP3031KTR-G1 Applications
There are a lot of Diodes Incorporated AP3031KTR-G1 LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Down lighting
- Panel lighting
- Down lights
- LED backlight driver for LCD displays for portable equipment
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
- Amusement Machines
- Scanners and Handy Terminals
