AP3064FNTR-G1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-QFN (4x4) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 100kHz~1MHz |
| Number of Outputs | 4 |
| Max Output Current | 220mA |
| Number of Channels | 4 |
| Max Supply Voltage | 33V |
| Voltage - Output | 60V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 33V |
| Output Current per Channel | 220mA |
| Current - Output / Channel | 220mA |
| Internal Switch(s) | No |
| Dimming | PWM |
| Voltage - Supply (Max) | 33V |
| Voltage - Supply (Min) | 4.5V |
| RoHS Status | ROHS3 Compliant |
AP3064FNTR-G1 Overview
In order to save board space, the led driver uses the 16-WQFN Exposed Pad package. It has 4 outputs for LED drivers.As a mounting method, Surface Mount is used.With high reliability and efficiency, this emerges as a DC DC Controller.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The benefits of Backlight are considerable.As a result, it operates on the basis of frequency 100kHz~1MHz.The LED light driver is configured with a base of 0 pins.If the voltage supply is below 4.5V, undetermined failures may occur.Surface Mount has been mounted with the device.It is acceptable to supply voltages of 33V volts.A 60V volt output voltage is provided by this device.It is designed to support a maximum value of 33V.A minimal input voltage of 4.5V is required for it to operate.The maximum supply current is 33V.An operating temperature above 85°C should ensure stable operation.Maintaining a temperature above -40°C is essential for stabilizing operation.A LED driver that operates at 220mA output current provides all the benefits of a LED driver.A total of 4 transmission channels are available.
AP3064FNTR-G1 Features
Available in the 16-WQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 100kHz~1MHz
AP3064FNTR-G1 Applications
There are a lot of Diodes Incorporated AP3064FNTR-G1 LED Driver ICs applications.
- Gallery lighting
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Down lights
- General lighting
- Amusement Machines
- Dimmable LED for vehicle interiors
- A- lamps
