AP3211KTR-G1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Voltage - Input (Max) | 18V |
| Output Voltage | 15V |
| Output Type | Adjustable |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 18V |
| Voltage - Input (Min) | 4.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 800μA |
| Output Configuration | Positive |
| Current - Output | 1.5A |
| Max Output Voltage | 15V |
| Voltage - Output (Min/Fixed) | 0.81V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Frequency - Switching | 1.4MHz |
| Max Input Voltage | 18V |
| Synchronous Rectifier | No |
| Min Output Voltage | 810mV |
| Voltage - Output (Max) | 15V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP3211KTR-G1 Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. There is a SOT-23-6 package available for this voltage regulator, as DC DC switching regulator is space-saving. DC DC switching regulator is configured with 1 outputs. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mounting is compatible with this switching regulator. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. A DC-DC switching regulator of this type operates at a switching frequency of 1.4MHz. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.81V. DC DC switching regulator's maximum design flexibility comes from its output current of 1.5A. Voltage regulator's input voltage can reach 18V. A voltage of 15V volts can be produced by voltage regulator. In order to operate voltage regulator, there are 6 pins that must be connected. The output voltage for this switching regulator should be kept at 810mV at least. A 1.5A A maximum output current is required to meet the switching regulator operation requirements. Based on the maximal adjusting voltage regulator's output voltage of 15V, adjusting voltage regulator can be operated easily. A maximum voltage of 15V can be obtained from the regulator voltage. With 18V as the supply voltage, this DC-DC switching regulator will operate. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 4.5V V. The high-limit maximum operating temperature 85°C allows harley voltage regulator stable operation. A minimum operating temperature of -40°C is required to ensure harley voltage regulator's reliability. The dc to dc voltage regulator's minimum input voltage that DC DC switching regulator can handle is 4.5V volts. 18V input voltage is supported at its maximum by this voltage regulator 12v. It operates on a 800μA supply current of adjusting voltage regulator.
AP3211KTR-G1 Features
1 outputs
6 pins
Operating supply voltage of 18V
AP3211KTR-G1 Applications
There are a lot of Diodes Incorporated AP3211KTR-G1 Voltage Regulators applications.
- Medical monitoring systems
- Lathes
- Scientific testing
- Mobile phones
- Industrial controllers
- Injection molding machinery
- Sink circuits
- Imported equipment
- CMM
- Production lines
