AP331AWRG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 740mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP331A |
| Pin Count | 5 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 740mW |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 8mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 40V |
| Max Input Current | 400nA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 8mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| Natural Thermal Resistance | 173 °C/W |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP331AWRG-7 Overview
A convenient transport package is provided in SC-74A, SOT-753 .The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has5 terminals.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 1 elements in it.Electronic comparator has 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.5 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching AP331A .A quiescent current of 2.5mA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 1mA supply current.You are allowed to input a maximum current of 400nA into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.A normal operation requires a voltage of 28V .
AP331AWRG-7 Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
AP331AWRG-7 Applications
There are a lot of Diodes Incorporated AP331AWRG-7 linear comparators applications.
- General-Purpose Portable Devices
- Power Supervision
- Threshold Detectors
- Self-diagnostics
- Ultra-Low Power Systems
- Building automation
- Point of load regulators
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- Body Control Modules
