AP3602AKTR-E1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight, Camera Flash |
| Frequency | 1.2MHz |
| Number of Outputs | 1 |
| Max Output Current | 250mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Output Current | 100mA |
| Max Output Voltage | 5.2V |
| Voltage - Output | 4.8V~5.2V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 100mA |
| Min Output Voltage | 4.8V |
| Current - Output / Channel | 100mA |
| Internal Switch(s) | Yes |
| Max Input Voltage (DC) | 5V |
| Min Input Voltage (DC) | 2.7V |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 5V |
| Voltage - Supply (Min) | 2.7V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP3602AKTR-E1 Overview
Additionally, there is a SOT-23-6 package for saving space.A LED driver using this design has 1 outputs.Surface Mount is used to mount the led driver.As a DC DC Regulator, it has high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight, Camera Flash has significant advantages.The system operates at a frequency of 1.2MHz.A configuration of this chip is made up of 6 pins.Having a voltage supply below 2.7V can lead to undetermined failures.This is mounted by Surface Mount.There is no problem with the voltage of 5V.4.8V~5.2V is the voltage output.Supply voltage can be set to a maximum value of 5V.The minimal input voltage is 2.7V.A minimum supply voltage of 2.7V is required to meet the highest efficiency standards.When the maximum supply current is allowed, the value reaches 5V.Operating temperatures should not exceed 85°C in order to ensure stable operation.Loads can only be powered by 100mA current.The operating temperature should be higher than -40°C so as to realize stable operation.Electronic components can function properly when their switching frequency is set to 1.2MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 250mA.Ideally, the output voltage should not exceed 5.2V.It maintains a 4.8V voltage at its minimal output.A total of 1 transmission channels are available.
AP3602AKTR-E1 Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.2MHz
AP3602AKTR-E1 Applications
There are a lot of Diodes Incorporated AP3602AKTR-E1 LED Driver ICs applications.
- OLED power supply for portable equipment
- Museum lighting
- Dimmable LED for vehicle interiors
- LED headlights
- Down lights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for portable equipment
- Replacement lamps
- Portable lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
