AP393AM8G-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 670mW |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 8mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 40V |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 8mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AP393AM8G-13 Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL is being used.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.Other Comparator like the device play a important role in the industry.A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical General Purpose comparator.There are a total of 2 elements in it.The device includes 8 pins.The recommended mounting method is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching AP393 .This comparator presents a quiescent current of 2.5mA .The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 1mA supply current.Comparator electronics follows that the voltage gain of the part is 106.02dB .
AP393AM8G-13 Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
AP393AM8G-13 Applications
There are a lot of Diodes Incorporated AP393AM8G-13 linear comparators applications.
- Mobile Communications
- Ultra-Low Power Systems
- Limit Comparators
- Battery management and protection
- Point of load regulators
- Automatic Test Equipment
- RC Timers
- Threshold Detectors
- Mobile Phones and Tablets
- Hand-Held Electronics
