AP393ASG-13
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 510mW |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 8mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 40V |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 8mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 510mW |
| Technology | BIPOLAR |
AP393ASG-13 Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, DTL, ECL, MOS, Open-Collector, TTL output on this device.This device is designed in Tape & Reel (TR) case.8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 2 .The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator is equipped with 8 pins.You may wish to search AP393 for more solutions that address your specific needs.A quiescent current of 2.5mA is displayed by this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .
AP393ASG-13 Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
AP393ASG-13 Applications
There are a lot of Diodes Incorporated AP393ASG-13 linear comparators applications.
- Zero-Crossing Detectors
- Metering Systems
- Factory automation & control
- Point of load regulators
- High-Speed Differential Line Receiver
- Window Comparators
- Industrial
- Body Control Modules
- Mobile Phones
- Lithium ion battery monitoring
