AP393SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOP |
| Weight | 142.994995mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Output Type | Open Collector |
| Number of Elements | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 510mW |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP393SG-13 Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is Open Collector .Electronic comparator is shipped by Tape & Reel (TR) .Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.This comparator has 8 pins.There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .A maximum current of 250nA can be supplied to the device.According to the voltage formula, the part has a voltage gain of 106.02dB .In general, temperatures higher than 70°C are not recommended.A temperature lower than 0°C is unsuitable for the device.36V is the maximum supply voltage of the comparator.A minimum supply voltage of 2V is allowed for this comparator.
AP393SG-13 Features
Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
AP393SG-13 Applications
There are a lot of Diodes Incorporated AP393SG-13 linear comparators applications.
- Self-diagnostics
- Mobile Phones and Tablets
- Notebooks and PDAs
- Current and voltage sensing
- Battery-Powered Electronics
- Appliances
- Mobile Communications
- Handheld Instruments
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
