AP5724FDCG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 26V |
| Max Output Current | 500A |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Max Supply Current | 500μA |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 750mA |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Min) | 2.7V |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP5724FDCG-7 Overview
In order to save board space, the led driver uses the 6-UDFN Exposed Pad package. In LED drivers, the outputs are all set to 1.The led driver mounting is done by using Surface Mount.It emerges as a DC DC Regulator, which is efficient and reliable.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Backlight.The system operates on the basis of the frequency 1.2MHz.A termination of 6 is used to operate the LED driver.In this LED driver, the base is configured as 6.A voltage supply below 2.7V may cause undetermined failures.Surface Mount is mounted on it.An acceptable maximum value for the supply voltage is 5.5V.A device with 6 pins is available.For maximum efficiency, it operates at the minimal voltage of 2.7V.It is possible to provide high efficiency when the maximal supply current is less than 500μA.When operating at the maximum output current of 500A, it is capable of providing all the benefits associated with LED drivers.The output voltage is 26V.Operation of the device requires 3.6V volts to be applied to the circuit.
AP5724FDCG-7 Features
Available in the 6-UDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Output voltage of 26V
AP5724FDCG-7 Applications
There are a lot of Diodes Incorporated AP5724FDCG-7 LED Driver ICs applications.
- Amusement Machines
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Refrigeration lighting
- Panel lighting
- LED backlight driver for LCD displays for portable equipment
- Flicker-free LED Lighting using R1580N
- Gallery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
