AP5725FDCG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Voltage - Output | 26V |
| Topology | Step-Up (Boost) |
| Output Current-Max | 0.75A |
| Output Current per Channel | 750mA |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Min) | 2.7V |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP5725FDCG-7 Overview
To save board space, it uses the 6-UDFN Exposed Pad package. It has 1 outputs for LED drivers.The led light driver is mounted using Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.-40°C~85°C TA is the operating temperature of the led driver.Backlight has considerable advantages.Based on the frequency of 1.2MHz, it operates.It operates using 6 terminations.The LED light driver has a base configuration of 6 pins.If the voltage supply is below 2.7V, undetermined failures may occur.The mount is on its way to Surface Mount.The supply voltage of 5.5V is an acceptable maximum value.This device has an output voltage of 26V volts.It consists of 6 pins.It is designed to operate at a minimal voltage of 2.7V to achieve the highest efficiency.When the device is operated, 3.6V volts are applied to the circuit.It is not recommended to exceed 0.75A in the output current.
AP5725FDCG-7 Features
Available in the 6-UDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
AP5725FDCG-7 Applications
There are a lot of Diodes Incorporated AP5725FDCG-7 LED Driver ICs applications.
- White LED Backlight for portable equipment
- OLED power supply for portable equipment
- Constant Voltage Power Source for portable equipment
- LED Lightings for Inspection Devices
- Refrigeration lighting
- Street lighting
- Stage and Studio lighting
- LED Lightings for Industrial Equipment
- Down lights
- General lighting
