AP5725WG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP5725 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Max Supply Current | 750mA |
| Voltage - Output | 26V |
| Topology | Step-Up (Boost) |
| Output Current-Max | 0.75A |
| Output Current per Channel | 750mA |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Min) | 2.7V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AP5725WG-7 Overview
To save space on the board, it has a SOT-23-6 package. LED drivers have a total of 1 outputs that are used in the design of the drivers.Mounting is done according to the Surface Mount method.It emerges as a DC DC Regulator with high efficiency.It is capable of operating at a temperature of -40°C~85°C TA. The benefits of Backlight are considerable.It operates based on the frequency of 1.2MHz.6 terminations are used in its operation.This LED driver is configured with a base of 6 pins.A voltage supply less than 2.7V will cause undetermined failures.On the Surface Mount, a device is mounted.This LED driver can be found under the base part number AP5725.It is acceptable to operate with a supply voltage of 5.5V.The output voltage is 26V.There are 6 pins on it.The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.Whenever the supply current is lower than 750mA, it can provide high efficiency.Operation of the device requires 3.6V volts to be applied to the circuit.A maximum output current of 0.75A should be maintained.
AP5725WG-7 Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
AP5725WG-7 Applications
There are a lot of Diodes Incorporated AP5725WG-7 LED Driver ICs applications.
- Stage Lighting and Signage
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage and Studio lighting
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Other Electronic Devices
