AP5725WUG-7
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP5725 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Voltage - Output | 26V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 750mA |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 6 |
| Voltage - Supply (Min) | 2.7V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 23 |
AP5725WUG-7 Overview
Space is saved using its SOT-23-6 Thin, TSOT-23-6 package. 1 outputs are designed into LED drivers.Surface Mount is used for mounting the led light driver.In this case, it emerges as a DC DC Regulator with a high efficiency.When the temperature is -40°C~85°C TA, it can work normally.The benefits of Backlight are considerable.The system operates at a frequency of 1.2MHz.It operates using 6 terminations.To form its configuration, there are 23 pins.Failures may occur if the voltage supply is below 2.7V.There are 6 segments.It has been mounted on Surface Mount.It can be found under the part number AP5725.It is acceptable for the voltage to be 5.5V.A voltage output of 26V is provided by this device.It consists of 6 pins.To meet high efficiency standards, it works with a voltage of 2.7V.The circuit is assigned 3.6V volts when operating.
AP5725WUG-7 Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
AP5725WUG-7 Applications
There are a lot of Diodes Incorporated AP5725WUG-7 LED Driver ICs applications.
- Architectural lighting
- Stage Lighting and Signage
- A- lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lighting PFCs, Linear Dimmable
- Linear fluorescent
- Street lighting
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
