AP5726FDCG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP5726 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Topology | Step-Up (Boost) |
| Output Current-Max | 0.75A |
| Output Current per Channel | 750mA |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Min) | 2.7V |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP5726FDCG-7 Overview
Space is saved using its 6-UDFN Exposed Pad package. There are 1 outputs used for the design of this LED drivers.This mounting method is Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.LED drivers capable of operating at -40°C~85°C TA can be used.The benefits are considerable for Backlight.The system operates at a frequency of 1.2MHz.It operates with terminations of 6.It has a base of 6 pins.A voltage supply below 2.7V may cause undetermined failures.The mount is on its way to Surface Mount.This LED driver can be found under the base part number AP5726.A maximum supply voltage of 5.5V is acceptable.6 pins are used on the device.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.When the device is operated, 3.6V volts are applied to the circuit.A maximum output current of 0.75A should be maintained.
AP5726FDCG-7 Features
Available in the 6-UDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
AP5726FDCG-7 Applications
There are a lot of Diodes Incorporated AP5726FDCG-7 LED Driver ICs applications.
- Replacement lamps
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
- Refrigeration lighting
- Other Electronic Devices
- Flicker-free LED Lighting using R1580N
- A- lamps
- Linear fluorescent
- LED backlight driver for LCD displays for portable equipment
