AP6507SP-13
| Parameters | |
|---|---|
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Voltage - Output (Max) | 15V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP6507 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Output Voltage | 15V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Operating Supply Voltage | 18V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.2mA |
| Output Configuration | Positive |
| Voltage - Output (Min/Fixed) | 0.808V |
AP6507SP-13 Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. A voltage regulator consists of 8 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. The space-saving 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is available for this voltage regulator. The voltage regulator is configured with 1 outputs. On its output pins, this adjusting voltage regulator generates Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 500kHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 4.5V is required for this voltage regulator to operate. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.808V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 12V is provided. This voltage regulator is included in the Switching Regulator or Controllers subcategory. In this case, the DC/DC regulator belongs to the family AP6507. The adjusting voltage regulator's output voltage is maintain at 15V. During switching regulator operation, 8 pins are used. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 3A A. DC DC switching regulator is able to operate in an easy way on the basis of the maximal output voltage of 15V. DC-DC switching regulator with supply voltage 18V. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 4.5V V is required. The DC-DC switching regulator runs on a 1.2mA supply current.
AP6507SP-13 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 18V
AP6507SP-13 Applications
There are a lot of Diodes Incorporated AP6507SP-13 Voltage Regulators applications.
- Remotely powered electric motors
- Elevator lighting
- Correction machines
- CMM
- seismic instrument power circuits
- Surge protection circuits
- Scientific testing
- Drilling machines
- Die casting equipment
- Motor controller circuits
