AP8800FNG-7
| Parameters | |
|---|---|
| High Level Output Current | 350mA |
| Dimming | Analog, PWM |
| Switching Frequency | 250kHz |
| Height | 580μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Lighting |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8800 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 30V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 350mA |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 28V |
| Output Current | 350mA |
| Max Supply Current | 30μA |
| Max Output Voltage | 28V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Max Input Voltage | 28V |
| Output Current per Channel | 350mA |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
AP8800FNG-7 Overview
In order to save board space, the led driver uses the 10-UFDFN Exposed Pad package. A LED driver using this design has 1 outputs.Surface Mount represents this mounting method.With high reliability and efficiency, this emerges as a DC DC Regulator.The led light driver is capable of working normally at -40°C~85°C TA.There are considerable benefits for Backlight, Lighting.Based on the frequency of 500kHz, it operates.There are 10 terminations associated with it.To form its configuration, 10 pins are used.Surface Mount is mounted on it.There is a base part number AP8800 for this LED driver.The supply voltage of 28V is an acceptable maximum value.A total of 10 pins are present on this device.A minimal input voltage of 8V is required for it to operate.The maximum supply current is 28V.This device is able to provide high efficiency when the maximal supply current should be less than 30μA.There is no current that can be supplied to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 250kHz.The maximum output current of 350mA allows it to deliver all benefits of a LED driver.This device produces a voltage of 30V as its output.The output voltage should not be in excess of 28V.When the device is operated, 12V volts are applied to the circuit.This device is equipped with an output type of Adjustable, Fixed.
AP8800FNG-7 Features
Available in the 10-UFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 500kHz
Switching frequency of 250kHz
Output voltage of 30V
AP8800FNG-7 Applications
There are a lot of Diodes Incorporated AP8800FNG-7 LED Driver ICs applications.
- Panel lighting
- Replacement lamps
- Refrigeration lighting
- High-end retail lighting
- Portable lighting
- Architectural lighting
- A- lamps
- Stage and Studio lighting
- OLED power supply for portable equipment
- Dimmable LED for vehicle interiors
