AP8801M8G-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Current Rating | 500mA |
| Frequency | 625kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8801 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 48V |
| Output Type | Fixed |
| Max Output Current | 500mA |
| Input Voltage-Nom | 24V |
| Max Supply Voltage | 48V |
| Output Current | 500mA |
| Max Supply Current | 120μA |
| Max Output Voltage | 48V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Max Input Voltage | 48V |
| Output Current per Channel | 500mA |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 48V |
| Current - Output / Channel | 500mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 500mA |
| Dimming | Analog, PWM |
| Switching Frequency | 500kHz |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP8801M8G-13 Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) saves board space. For the design of this LED driver, 1 outputs are used.The led light driver is mounted using Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~105°C TA.The benefits of Backlight, Lighting are considerable.Based on the frequency of 625kHz, it operates on the basis of a pulse.In this case, it uses 8 terminations.It is configured with 8 pins as its base.I have mounted it by Surface Mount.This LED driver can be found under the base part number AP8801.It is acceptable for the supply voltage to be 48V.There are 8 pins on this device.A minimal input voltage of 8V is required for it to operate.The maximum value of supply current is 48V.As long as the maximum supply current is under 120μA, it can deliver high efficiency.A load can be supplied with 500mA current.The electronic component can function fully when the switching frequency is maintained at 500kHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 500mA.This device produces a voltage of 48V as its output.If the output voltage exceeds 48V, it should be corrected.When the device is operated, 24V volts are applied to the circuit.This device has a Fixed output type.
AP8801M8G-13 Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~105°C TA
Frequency of 625kHz
Switching frequency of 500kHz
Output voltage of 48V
AP8801M8G-13 Applications
There are a lot of Diodes Incorporated AP8801M8G-13 LED Driver ICs applications.
- Medical surgery lighting
- General lighting
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- A- lamps
- LED Lightings for Industrial Equipment
- LED Lightings for Inspection Devices
- Down lighting
- Auxiliary lights for on-vehicle cameras
- LED Lighting PFCs, Linear Dimmable
