AP8801SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 625kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8801 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 48V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 500mA |
| Input Voltage-Nom | 24V |
| Max Supply Voltage | 48V |
| Output Current | 500mA |
| Max Supply Current | 120μA |
| Max Output Voltage | 50V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Max Input Voltage | 48V |
| Output Current per Channel | 500mA |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | -300mV |
| Current - Output / Channel | 500mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 500mA |
| Dimming | Analog, PWM |
| Switching Frequency | 500kHz |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP8801SG-13 Overview
To save board space, it uses the 8-SOIC (0.154, 3.90mm Width) package. As part of the design of this LED driver, there are 1 outputs that have been used.We are using Surface Mount as the mounting method.DC DC Regulator emerges with high efficiency and reliability.-40°C~105°C TA is a valid operating temperature for the led driver.A number of benefits are available to Backlight, Lighting.The frequency of 625kHz is used as the basis for its operation.It is designed to work with 8 terminations.It is configured with 8 pins as its base.It's mounted on the way to Surface Mount.The LED driver is based on part number AP8801.48V is a maximum acceptable voltage for the supply.8 pins are used on the device.A minimal input voltage of 8V is required for it to operate.The allowable maximum value of supply current reaches 48V.When the supply current should be less than 120μA, the device will provide high efficiency.The current that can be supplied to the load is 500mA.As long as the switching frequency is maintained at 500kHz, this electronic component is able to perform all of its functions properly.When operating at the maximum output current of 500mA, it is capable of providing all the benefits associated with LED drivers.Currently, it is generating 48V voltage.50V should be the maximum output voltage.A circuit operated by the device has 24V volts.-300mV is the minimal voltage it outputs.It is equipped with the output type of Adjustable, Fixed.
AP8801SG-13 Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~105°C TA
Frequency of 625kHz
Switching frequency of 500kHz
Output voltage of 48V
AP8801SG-13 Applications
There are a lot of Diodes Incorporated AP8801SG-13 LED Driver ICs applications.
- Architectural lighting
- Gallery lighting
- Panel lighting
- Sports Facility Lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage Lighting and Signage
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- Amusement Machines
- Replacement lamps
