AP8802FNG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Lighting |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 700kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8802 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 48V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 1A |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 48V |
| Output Current | 1A |
| Max Supply Current | 120μA |
| Max Output Voltage | 48V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 48V |
| Output Current per Channel | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 48V |
| Current - Output / Channel | 1A Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 1A |
| Dimming | Analog, PWM |
| Switching Frequency | 500kHz |
| Height | 580μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP8802FNG-7 Overview
10-UFDFN Exposed Pad package saves space on the board. LED drivers have a total of 1 outputs that are used in the design of the drivers.In order to mount the led light driver, Surface Mount is used.It emerges as a DC DC Regulator, which is efficient and reliable.It is able to work normally at the operating temperature of -40°C~105°C TA.A number of benefits are available to Backlight, Lighting.The system operates on the basis of the frequency 700kHz.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 10 pins.Surface Mount is mounted on it.Part number AP8802 represents this LED driver.In this case, 48V is acceptable.There are 10 pins on it.As a result of its characteristics, it is also classified as Switching Regulator or Controllers.A minimal input voltage of 8V is required for it to operate.In terms of supply current, there is a maximum value of 48V.As long as the supply current is less than 120μA, this device can provide high efficiency.The load is capable of receiving 1A current.It's possible for this electronic component to fully function when the switching frequency is maintained at 500kHz.LED drivers can deliver all benefits of 1A due to their maximum output current.This device has a voltage output of 48V volts.Ideally, the output voltage should not exceed 48V.Operation of the device requires 12V volts to be applied to the circuit.This device is equipped with an output type of Adjustable, Fixed.
AP8802FNG-7 Features
Available in the 10-UFDFN Exposed Pad package
Operating temperature of -40°C~105°C TA
Frequency of 700kHz
Switching frequency of 500kHz
Output voltage of 48V
AP8802FNG-7 Applications
There are a lot of Diodes Incorporated AP8802FNG-7 LED Driver ICs applications.
- Stage and Studio lighting
- Portable lighting
- Flicker-free LED Lighting using R1580N
- Sports Facility Lighting
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
- Down lighting
