AP8802HSP-13
| Parameters | |
|---|---|
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Max Input Voltage | 60V |
| Output Current per Channel | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | -300mV |
| Current - Output / Channel | 1A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 500kHz |
| Height | 1.45mm |
| Length | 4.95mm |
| Width | 3.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 700kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 92 % |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 60V |
| Output Current | 1A |
| Max Output Voltage | 50V |
AP8802HSP-13 Overview
Using its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is possible to save board space. This LED driver has 1 outputs.Surface Mount is used to mount the led light driver.It emerges as a DC DC Regulator with high efficiency.LED drivers capable of operating at -40°C~125°C TA can be used.Backlight, Lighting has many advantages.A frequency of 700kHz is used to operate it.In this case, the terminations are set to 8.This configuration is built upon 8 pins.I have mounted it by Surface Mount.The LED driver is based on part number AP8802.As a maximum value, 60V is acceptable.On this device, there are 8 pins.It operates at a voltage of 8V as its minimal input voltage.Supply current is limited to 60V at its maximum value.There is no current available to supply to the load.This electronic component can fully perform its functions when the switching frequency is kept at 500kHz.When operating with a 1A output current, the LED driver delivers all the benefits.If the output voltage exceeds 50V, it should be corrected.When the device is operated, it has 12V volts assigned to it.-300mV is the minimal voltage it outputs.This device is equipped with an output type of Adjustable.
AP8802HSP-13 Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 700kHz
Switching frequency of 500kHz
AP8802HSP-13 Applications
There are a lot of Diodes Incorporated AP8802HSP-13 LED Driver ICs applications.
- White LED Backlight for portable equipment
- Stage Lighting and Signage
- Portable lighting
- Down lighting
- Gallery lighting
- Flicker-free LED Lighting using R1580N
- Scanners and Handy Terminals
- OLED power supply for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
