AP8802SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Lighting |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 700kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 50V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 1A |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 48V |
| Output Current | 1A |
| Max Supply Current | 120μA |
| Max Output Voltage | 50V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 48V |
| Output Current per Channel | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | -300mV |
| Current - Output / Channel | 1A Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 1A |
| Dimming | Analog, PWM |
| Switching Frequency | 500kHz |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP8802SG-13 Overview
Its 8-SOIC (0.154, 3.90mm Width) package is used to save board space. It has 1 outputs for LED drivers.In this case, mounting method is Surface Mount.With high efficiency, it appears as a DC DC Regulator.-40°C~105°C TA is the operating temperature of the led driver.Backlight, Lighting has many advantages.Based on the frequency of 700kHz, it operates on the basis of a pulse.In this case, it operates with terminations of 0.With a base of 8, this LED light driver is configured.Surface Mount is mounted in the way.The LED driver can be found under the base part number AP8802.As a maximum value, 48V is acceptable.The device has a pin count of 8.Furthermore, it can be categorized as Switching Regulator or Controllers based on its characteristics.A voltage of 8V is its minimal input voltage.48V is the maximum value of the supply current.When the supply current should be less than 120μA, the device will provide high efficiency.Loads can only be powered by 1A current.This electronic component may perform its functions fully if the switching frequency is maintained at 500kHz.LED drivers can deliver all benefits of 1A due to their maximum output current.The output voltage is 50V.There shouldn't be an increase in output voltage over 50V.While operating the device, the circuit has 12V volts.A minimum voltage of -300mV is maintained by its output.Adjustable, Fixed is its output type.
AP8802SG-13 Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~105°C TA
Frequency of 700kHz
Switching frequency of 500kHz
Output voltage of 50V
AP8802SG-13 Applications
There are a lot of Diodes Incorporated AP8802SG-13 LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Replacement lamps
- LED headlights
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Amusement Machines
- General lighting
- Refrigeration lighting
- Portable lighting
- Gallery lighting
