AP8802SPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Lighting |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 700kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 50V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 1A |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 48V |
| Output Current | 1A |
| Max Supply Current | 120μA |
| Max Output Voltage | 50V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 48V |
| Output Current per Channel | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 48V |
| Min Output Voltage | -300mV |
| Current - Output / Channel | 1A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 500kHz |
| Height | 1.45mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP8802SPG-13 Overview
Using its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is possible to save board space. LED drivers use 1 outputs for their design.The led driver mounting is done by using Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.LED drivers capable of operating at -40°C~105°C TA can be used.Backlight, Lighting has many benefits.The frequency of 700kHz is used as the basis for its operation.8 terminations are designed for its operation.The configuration of the board is built around 8 pins.There is a device mounted on the Surface Mount.It's under the AP8802 base part number.The supply voltage of 48V is an acceptable maximum value.In this device, there are 8 pins.Further, it can be classified as Switching Regulator or Controllers based on its characteristics.The minimal input voltage is 8V.There is 48V maximum value for supply current.With a minimum supply current less than 120μA, this device achieves high efficiency.Loads can only be powered by 1A current.This electronic component may perform its functions fully if the switching frequency is maintained at 500kHz.At maximum output current 1A, it will deliver all the benefits of a LED driver.There is 50V voltage output from it.If the output voltage exceeds 50V, it should be corrected.A circuit operated by the device has 12V volts.It maintains a -300mV minimum voltage output.The output type is Adjustable, Fixed.
AP8802SPG-13 Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~105°C TA
Frequency of 700kHz
Switching frequency of 500kHz
Output voltage of 50V
AP8802SPG-13 Applications
There are a lot of Diodes Incorporated AP8802SPG-13 LED Driver ICs applications.
- Panel lighting
- White LED Backlight for portable equipment
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- OLED power supply for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- LED backlight driver for LCD displays for Tablets and Note PCs
- Refrigeration lighting
- Auxiliary lights for on-vehicle cameras
