APS-100ELL271MHB5S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2010 |
| Series | NPCAP™-PS |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 270μF |
| Voltage - Rated DC | 10V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 14mOhm |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 10V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 4.42A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 4.42A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 8mm |
| Height | 11.5mm |
| Height Seated (Max) | 0.512 13.00mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PS series. This part is mounted in the way of Through Hole. The type of the APS-100ELL271MHB5S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APS-100ELL271MHB5S is suitable to conduct the ripple current at 4.42A. APS-100ELL271MHB5S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 10V. APS-100ELL271MHB5S Capacitor. It has Radial terminations in total. The voltage for the part is specified as 10V volts.
NPCAP™-PS Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APS-100ELL271MHB5S Aluminum Polymer Capacitors.
Typically, APS-100ELL271MHB5S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Computer motherboards
- Audio Crossover
- Frequency Converters
- PFC
- Coupling or blocking
- DC Link
- Voltage Doubling
- Motor Start
- DC Buffering
- Decoupling Noise Filtering
