APS-100ELL471MJC5S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2010 |
| Series | NPCAP™-PS |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 470μF |
| Voltage - Rated DC | 10V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 12mOhm |
| Lead Spacing | 0.197 5.00mm |
| Lead Diameter | 600 μm |
| Voltage | 10V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 5.3A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.3A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 10mm |
| Height | 12.5mm |
| Height Seated (Max) | 0.492 12.50mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 470μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PS series. This part is mounted in the way of Through Hole. The type of the APS-100ELL471MJC5S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APS-100ELL471MJC5S is suitable to conduct the ripple current at 5.3A. APS-100ELL471MJC5S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 10V. APS-100ELL471MJC5S Capacitor. It has Radial terminations in total. The voltage for the part is specified as 10V volts.
NPCAP™-PS Series
Capacitance: 470μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APS-100ELL471MJC5S Aluminum Polymer Capacitors.
Typically, APS-100ELL471MJC5S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Signal decoupling & power bypass
- Coupling or blocking
- Smoothing Noise Filtering
- Spot Welding
- Computer motherboards
- Flashtube Ignition
- Decoupling Noise Filtering
- DC/DC, DC/AC, and AC/AC converters
- Motor Control
